Description
Gunfighter Mk.III ‘Modern Combat Edition’ Ultimate
Adjustable dampers allow the user to adjust the friction of the stick, which results in a heavier throw with less oscillation. The all-metal gimbal supports up to two springs per axis (up to 2x #40 spring strength), which allows for a stiffer overall feel during stick movement.
Grip Options Include:
MCG Ultimate grip
- All-metal, right-hand grip design
- 24-32 programmable buttons, based on module installed
- 5 analog axes (2x slew control ministick axes / 2x trimmer ministick axes / 1x brake lever axis)
- Dual-stage trigger (trigger 1)
- Metal folding trigger (trigger 2) with two-position sensor (flipped up/down)
- Ministick module
- Hat switch module
- Button caps (black color)
- Screwdriver
- Set of grip fasteners
–OR–
MCG Ultimate grip w/ Built-In Twist Adapter
- All-metal, right-hand grip design
- 24-32 programmable buttons, based on module installed
- 6 analog axes (2x slew control ministick axes / 2x trimmer ministick axes / 1x twist axis / 1x brake lever axis)
- Dual-stage trigger (trigger 1)
- Metal folding trigger (trigger 2) with two-position sensor (flipped up/down)
- Lockable twist adapter
- Ministick module
- Hat switch module
- Button caps (black color)
- Screwdriver
- Set of grip fasteners
Specifications for all MCG Ultimate grip variants:
- Made from a lightweight, durable aluminum alloy.
- Made with OMRON and ALPS precision buttons and switches; Adjustable palm rest (25mm height adjustment); Ergonomic grip angle (can be rotated left up to 15 degrees)
Included Gunfighter Mk.III Base:
Hardware:
- Built to Last
- All-metal gimbal w/ adjustable axis dampers
- Swappable cams and springs
- “Avia” cams with progressive loading (soft and hard center)
- “Space” cams with linear loading (soft and hard center)
- Cams made of hardened stainless steel alloy
- Wide stance tabletop base plate
- Blackbox w/ 32-bit ARM MCU active USB 2.0 controller
- Set of springs
- Spring installation tool
- 50 cm (1.6′) interface cable
- 180 cm (6′) USB 2.0 cable
Features:
- Works with all flight simulations
- No drivers required
- Digital Hi-resolution contactless sensors
- Save and load custom profiles
- Software tunable axes
- Upgradeable firmware via USB interface
Optional Kit:
Gunfighter Pro-L(ong) comes with a 200 mm Stick Extension
- 200 mm (8″) curved extension
- Set of #50 springs – extra strong
- Grip fastener
- Does not include Small Base Plate (offered separately)
Gunfighter Pro-S(hort) comes with a 100 mm Stick Extension
- 100 mm (4″) straight extension
- Set of #50 springs – extra strong
- Grip fastener
- Does not include Small Base Plate (offered separately)
Warranty:
- 2 Years
Instructions:
Downloads:
- Please visit the Downloads section for configuration software, device firmware, as well as software documentation.
- VKB Gunfighter Tabletop Measurements
- VKB Gunfighter Pro Measurements
How to swap the ministicks with HAT switch modules on the MCG Ultimate grip:
Replacing cams and springs, adjusting the dry clutch, installing a grip on a Gunfighter base:
NOTE: The clutch dampers may be tightened at the factory to prevent them from loosening during shipping; before you connect your Gunfighter to your PC, you will need to loosen the dampers for both pitch and roll axes to achieve correct return-to-center axes movements after calibration.
