Gunfighter Mk.III ‘Modern Combat Edition’

$359.00 – $484.00

Recommended for the serious player of flight simulations, who prefers to fly either from the desk or custom sim pit setup; the addition of the MCG or MCG PRO grip allows for vast customization options, with analog slew and trim axes. The metal gimbal of the Gunfighter Series adds custom spring and cam options, and the adjustable dampers allow for added friction for a heavier throw. (Scroll down for product descriptions & relevant downloads)

Clear
SKU: N/A Category:

Description

Gunfighter Mk.III ‘Modern Combat Edition’

Adjustable dampers allow the user to adjust the friction of the stick, which results in a heavier throw with less oscillation. The all-metal gimbal supports up to two springs per axis (up to 2x #40 spring strength), which allows for a stiffer overall feel during stick movement, especially when using an extension or a heavy grip

Includes: 

MCG grip

  • Right-hand grip design
  • 14 programmable buttons
  • 5 analog axes (2x slew control ministick axes / 2x trimmer ministick axes / 1x brake lever axis)
  • Dual-stage trigger (trigger 1)
  • Metal folding trigger (trigger 2)

–OR–

MCG PRO grip

  • Right-hand grip design
  • 24 programmable buttons
  • 6 analog axes (2x slew control ministick axes / 2x trimmer ministick axes / 1x folding trigger axis / 1x brake lever axis)
  • Dual-stage trigger (trigger 1)
  • Metal folding trigger (trigger 2) with two-position sensor (flipped up/down)

–OR–

MCG PRO grip w/ Built-In Twist Adapter

  • Right-hand grip design
  • 24 programmable buttons
  • 6 analog axes (2x slew control ministick axes / 2x trimmer ministick axes / 1x folding trigger axis / 1x brake lever axis)
  • Dual-stage trigger (trigger 1)
  • Metal folding trigger (trigger 2) with two-position sensor (flipped up/down)
  • Built-in twist adapter (adds additional rudder axis)

Specifications for all MCG variants:

  • Made with OMRON and ALPS precision buttons and switches; Grip made from industrial strength ABS (injection molding); Adjustable palm rest (25mm height adjustment); Ergonomic grip angle (can be rotated left up to 15 degrees)

Included Gunfighter Mk.III Base:

Hardware:

  • Built to Last
  • All-metal gimbal w/ adjustable axis dampers
  • Swappable cams and springs
  • “Avia” cams with progressive loading (soft and hard center)
  • “Space” cams with linear loading (soft and hard center)
  • Cams made from special hardened aluminum alloy
  • Wide stance tabletop base plate
  • Blackbox w/ 32-bit ARM MCU active USB 2.0 controller
  • Set of springs
  • Spring installation tool
  • 50 cm (1.6′) interface cable
  • 180 cm (6′) USB 2.0 cable

Features:

  • Works with all flight simulations
  • No drivers required
  • Digital Hi-resolution contactless sensors
  • Save and load custom profiles
  • Software tunable axes
  • Upgradeable firmware via USB interface

Optional Kit:

Gunfighter Pro-L(ong) comes with a 200 mm Stick Extension

  • 200 mm (8″) curved extension
  • Set of #50 springs – extra strong
  • Grip fastener
  • Does not include Small Base Plate (offered separately)

Gunfighter Pro-S(hort) comes with a 100 mm Stick Extension

  • 100 mm (4″) straight extension
  • Set of #50 springs – extra strong
  • Grip fastener
  • Does not include Small Base Plate (offered separately)

Warranty:

  • 2 Years

Documentation:

Downloads:

NOTE: The clutch dampers are tightened at the factory to prevent them from loosening during shipping; before you connect your Gunfighter to your PC, you will need to loosen the dampers for both pitch and roll axes to achieve correct return-to-center axes movements after calibration (refer to the Gunfighter Quick Guide for details). 

Related products