Description
GNX USB Controller (HID-Main)
Includes
- PCB board
- Set of screws
- USB Type-C to Type-A cable (180 cm / 6′)
- Transparent rubber lens for LED
- Provides USB connectivity for GNX modules to the PC (by default, GNX modules are designed to connect/attach via GNX Module-to-Module Interface Cable to each other and/or Gladiator NXT/EVO joysticks)
- Required when connecting GNX Modules directly to the PC via USB cable
- Required when the total amount of analog axes per GNX device combo exceeds eight; must be then directly connected to the PC via USB cable instead
MS Windows DirectInput allows for only 8 axes per controller
You’ll need 1x GNX-HID USB controller if there are more than 8 axes in your GNX configuration (and another one if there are more than 2×8=16 axes)
Example: For 8 axes, you do not need any GNX-HID USB controller; however, for 9 to 16 axes you’ll need 1x GNX-HID USB controller, and for 17 to 24 axes you’ll need 2x GNX-HID USB controllers, and so on
Features
- NJoy32 platform
- 32-bit ARM Controllers inside base and grip
- Plug & Play with Driver-Free Installation (Recommended for Most Users)
- Firmware Upgrade via USB
- Onboard Memory for Storing Profiles
- Optional Programming Software Available (For Advanced Users)
- USB 2.0 HID controller
- Type-C connection
Connectivity
- USB 2.0
Warranty
- 2 Years
Compatible with
- GNX THQ/V
- GNX FSM-GA
- GNX SEM/V
Instructions
Downloads
- Please visit the Downloads section for configuration software, device firmware, as well as software documentation.
Video Guide
