Description
GNX FSM-GA (Front Switchboard Module – General Aviation)
Includes
- FSM-GA Module
- Type-C connector guard
- GNX Module-to-Module Interface Cable (Type-C to Type-C)
Does not include a USB Controller (refer to ‘Connectivity’ below)
Vertical module
- Requires GNX MFH (Multi-Functional Holder) in order to mount module
- Due to its width, FSM cannot be attached side-by-side to other GNX-V modules on the same MFH
Vertical GNX modules cannot be connected directly to a Gladiator NXT/EVO joystick; instead, they will have to be connected to a GNX tabletop module (THQ or SEM) that has been attached to a Gladiator NXT/EVO joystick
Features
- 2 Rotary encoder knobs w/ push button
- 1 Wheel encoder
- 16 Push buttons
- 12 bi-colored LEDs
Connectivity
- Included – GNX Module-to-Module Interface Cable
- Used when connecting/attaching GNX modules directly to a Gladiator NXT/EVO joystick or GNX module
–OR–
- Not included – GNX USB Controller (HID-Main)
- Required when connecting GNX Modules directly to the PC via USB cable
- Required when the total amount of analog axes per GNX device combo exceeds eight; must be then directly connected to the PC via USB cable instead
Warranty
- 2 Years
Compatible with
- Gladiator NXT/EVO
- Gladiator NXT EVO Omni Throttle
- UCM Stronghold
- GNX USB Controller (HID-Main)
Instructions
Downloads
- Please visit the Downloads section for configuration software, device firmware, as well as software documentation.
GNX FSM-GA Hardware Video Guides